Pro-Ject Audio Systems was founded by Heinz Lichtenegger 1990 in Vienna, with the idea that analogue playback is the most costeffective way to listen to music of audiophile quality. Inspired by the concept of supporting analogue in the face of the digital onslaught, Pro-Ject Audio Systems became one of the most powerful driving forces in reinventing analogue turntables for the hi-fi market. Today, Pro-Ject Audio Systems is the world leader in the manufacture of quality hi-fi turntables, as turntables are once again accepted as a must-have for every concerned music lover. Pro-Ject Audio Systems’ products are exported to almost 80 countries worldwide and is the recipient of nearly every award in the audio industry.
For a complete list of Pro-Jects full line of tables contact us.
The new Elemental table is a real “plug’n’play” all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight ultra low mass tonearm is optimised for Ortofon OM cartridge series.
The hidden secret to the new table’s sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards
-Belt drive system
-Integrated motor control with DC power supply secures silent running
-Central gravity mass point made from artificial stone
-Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom
-Low resonance particle board platter with felt mat
-8,6” ultra low mass tonearm with straight arm tube
The new Primary "plug & play" turntable from Pro-Ject is super easy to use without any need of counterweight and anti-skating adjustment. Simply connect it to a phono preamp or amplifier with phono preamp using the pre-mounted interconnect cable with gold-plated RCA plugs. Then, just add vinyl.
• Belt drive with silicone belt
• Low vibration synchronous AC motor
• DC driven AC motor control
• 8.6" aluminium tone-arm
• Unique OM 5 optimized tonearm
• Complete with acrylic lid
• Colour: Black
• Dimensions 420 x 112 x 330mm (WxHxD)
Essential III offers a variety of enhancements compared to its successful predecessor, such as a diamond-cut aluminum drive pulley, a resonance-optimized MDF main platter and MDF chassis. The refined, high-precision platter bearing has significantly tighter production tolerances than Essential II. Essential III is the audiophile’s first turntable! The setup is very simple, the included Phono RCA cable, Connect it E, sounds far above its price range.
Equipped with the high-quality pickup OM10 by the phonographic cartridge pioneer Ortofon, Essential III delivers lively, balanced and highly involving sound that will delight every vinyl lover.
-Belt drive with synchronous motor and silicone belt
-Diamond cut aluminium drive pulley
C-hassis & platter made of resonance in-sensitive MDF
I-ntegrated DC-powered motor control minimizes motor vibration and guarantees speed stability
-Low tolerance platter bearing with strainless steel spindle
-8,6” aluminium tonearm with sapphire bearings
-Ortofon OM10 cartridge pre-mounted
-High-quality semi-balanced Connect it E phono interconnect with gold-plated RCA connectors included
-Special decoupling feet
-Dust cover included
-High-gloss colour options: black, red, white
The new DEBUT Carbon DC was designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!
The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance. This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilizing TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.
-8,6” carbon tonearm
-Increased platter size with more weight
-Precision belt drive with synchronous motor
-New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.
-New TPE motor suspension
-Magnetic cartridge options from Ortofon OM 10 or 2M red
-7 high-gloss colours
-Dust cover included
Klipsch R-15PM and Pro-Ject Turntable Package
Klipsch speaker and turntable package. It's extremely easy to set up and operate, while delivering richly detailed room-filling sound with 50 watts per channel. The Klipsch ReferenceR-15PM bookshelf speakers come with a built-in phono preamp, so you don't need any additional components. And setup is simple, with just two cable connections one to connect the left and right speakers, and a second to connect the turntable to the speakers.
Pro-Ject Jukebox E Turntable
Pro-Ject Jukebox E Turntable.
A Primary Model Turntable with Ortofon OM 5E cartridge. Built in amp of 25watts per channel and pre amp phono stage.
Blue tooth ready, speaker input, RCA input and dust cover.
Control button in front for selection with volume LED display. Remote control also included.
This turntable has everything needed to play vinyl except the speakers. Space saving, clean compact system with Pro-Ject quality.
Perfect for the audiophile who wants to down-size they're vinyl system but not compromise sound and quality.
Rega was founded in 1973. The company's name was formed of the initials of its two founders (RElph&GAndy).
Rega are widely known for their turntables, cartridges and tonearms, and has produced award winning amplification and speakers for over 20 years.
The RP1 is a simple high quality turntable. It has a rectangular plinth with three rubber feet. A hand-assembled Rega RB101 tonearm, Rega carbon moving magnet cartridge, phenolic resin flywheel, improved stability, and low vibration motor.
Manual speed change where the drive belt is moved by hand between the pulley steps. Ortofon OMB5 cartridge
Rega 'Queen' limited edition
Rega are proud to have been approached by legendary rock band ‘Queen’ to produce a limited edition (fully licensed) turntable.
The design of this unique custom turntable includes reproductions of classic Queen logo’s, and incorporates
the tonearm technology of the multi-award-winning ‘plug and play’ Rega turntables. Both brand and band are
quintessentially English and the combination of engineering and musical achievements make for a perfect match.
Custom designed high gloss acrylic laminated plinth silk screened with ‘Queen by Rega’ logo.
Silk screened ‘Queen crest’ platter from artwork created by Freddie Mercury.